Advanced Bedding F.A.Q .

How Many pillow cases will come with my sheet set?

Sheets sets that have a width of 50” or higher will come with 2 pillow cases.  Anything under 50” wide will come with 1 pillow case.

What size pillow cases will my sheet set come with?

Š  Less than 50” Wide = 1 standard case

Š 50-59” =2 standard cases

Š 60-69” = 2 Queen cases

Š 70” and up= 2 King cases

 

What if I want standard sized pillow cases with my King sheet set?

Type “Please fill this order with Standard sized pillow cases” in the Special Instructions field that is provided.

Pillow case sizes can be changed at no charge.

 

What are Anchor Tite Corners, Fitted Top Sheet and Wings?

 

I have an unusual sized bed.  How do I order for that?

You would order in our custom section:

http://www.advancedbedding.com/custom.php

1. Click the  button in the fabric of your choice.

2. Scroll down to see all the products available.  

3. Use the drop down menus to select dimensions.  Please use the actual measurements of your mattress.  Round up to the next inch if your measurement is anything over an inch (EXAMPLE: if your depth is 10 ¼”, round up to 11”).

4. Use the “Special Instructions” field for any unusual circumstances that needs noting (EXAMPLE: Please fill this order with standard sized pillow cases instead of King.)

5.  Add your product to the cart and proceed to checkout.

 

What if my custom sized bed is bigger than the measurements on your website?

1. Choose the highest measurement we offer and use the “Special Instructions” field to indicate the actual measurement.

2. In the search field in the upper right corner of the website type, “Custom Modification”.

3.  Add a $35 charge to your cart for each product you are ordering in this custom size.

4. Proceed to check out.

* We highly recommend Anchor Tite Corners for large custom sized beds.  Some larger sizes may have seams that run through the sleeping surface of the bed.  Please email inquiries on custom orders to orders@advancedbedding.com.

Can I get sheets for a Partial Split Adjustable bed that looks like this?

Yes, we carry a full line of products for that bed.  You would order in the Adjustable Bed Section:

 http://www.advancedbedding.com/adjustable.php

2. Click the  button in the fabric of your choice.

3. Scroll down to see all the products available.  

4. Use the drop down menus to select dimensions.  Please use the actual measurements of your mattress.  We cut to allow for shrinkage.

Round up to the next inch if your measurement is anything over an inch (EXAMPLE: if your depth is 10 ¼”, round up to 11”).

5. Measure your split length carefully by moving your tape measure off the split so that you can measure accurately like this:


6. Use the “Special Instructions” field for any unusual circumstances that needs noting (EXAMPLE: Please fill this order with standard sized pillow cases instead of King.)

7.  Add your product to the cart and proceed to checkout.

 

How do I know what size round bed I have?

Round bed sizes are measured by diameter.  Standard sizes for round beds are 72”, 84” and 96” diameter.  Run a tape measure across the middle of your bed.  Move one end of the tape back and forth to insure that you are measuring at the widest part. Like this:

 

 

You will also need to measure how thick your mattress is (DEPTH).  Include the full loft of your bed with any toppers and mattress pads that you already have or are ordering.  EXAMPLE: 

 

You would order in the Round section: https://www.advancedbedding.com/round.php

 

2. Click the  button in the fabric of your choice.

3. Scroll down to see all the products available.  

4. Use the drop down menus to select dimensions.  Please use the actual measurements of your mattress.  We cut to allow for shrinkage.

 

What if my Round Bed is not a standard size?

If your round bed is not a standard size you would choose the size larger than your bed and type the actual dimension in the special instructions field.  Here is an example: